Calendar

 

Safety Programs

METI can provide customized training at your location. Ask us about out group discounts.

For inquiries, for booking or to learn more about what we offer, please contact us at 902-539-9766 or training@metiatlantic.com

Sun Mon Tue Wed Thu Fri Sat
1
ESC Fall Protection (Energy Safety Canada) 8:30 am
ESC Fall Protection (Energy Safety Canada)
Jun 1 @ 8:30 am – 4:30 pm
Upon completion of this classroom based and simulated learning experience, the participant should be able to demonstrate Energy Safety Canada standards in identifying and eliminating fall hazards by employing fall protection measures, including fall arrest
Forklift Operator Safety Training 8:30 am
Forklift Operator Safety Training
Jun 1 @ 8:30 am – 4:00 pm
Upon completion of this classroom based and simulated learning experience, the participant should be able to identify and control hazards, while demonstrating safe operation of “lift trucks” in compliance with provincial and federal regulations. To
Standard First Aid / CPR / AED Level C (2 Day) 8:30 am
Standard First Aid / CPR / AED Level C (2 Day)
Jun 1 @ 8:30 am – 4:30 pm
Upon completion of this classroom based and practical learning experience, as delivered in conjunction with St. John Ambulance, the participant should be able to implement first aid and life-saving measures. To visit the Standard First
2
Fall Protection 8:30 am
Fall Protection
Jun 2 @ 8:30 am – 4:30 pm
Upon completion of this classroom based and simulated learning experience, the participant should be able to identify and eliminate fall hazards by employing fall protection measures, including fall arrest and fall restraint. To visit the
Skid Steer Operator Safety Training 8:30 am
Skid Steer Operator Safety Training
Jun 2 @ 8:30 am – 4:30 pm
Upon completion of this classroom based and practical learning experience, the participant should be able to demonstrate safe operation of a Skid Steer, while identifying and controlling specific health and safety hazards associated with operating.
Trenching & Excavating Awareness (AM) 8:30 am
Trenching & Excavating Awareness (AM)
Jun 2 @ 8:30 am – 12:00 pm
If you are working on a work site that has either trenches or excavations, you need METI’s Trenching & Excavating Awareness. To visit the Trenching & Excavating Awareness Training page click here      
Power Line Hazard (PLH)pm 12:00 pm
Power Line Hazard (PLH)pm
Jun 2 @ 12:00 pm – 4:30 pm
Power Line Hazard PLH Training will prepare you to work safely near power lines by recognizing hazards and putting controls in place to prevent injury to people and property damage. Power Line Hazards Certification is
3
Emergency First Aid, CPR & AED Level A 8:30 am
Emergency First Aid, CPR & AED Level A
Jun 3 @ 8:30 am – 4:00 pm
Upon completion of this classroom based and simulated learning experience, as delivered in conjunction with St. John Ambulance, the participant should be able to implement first aid and life-saving measures. To visit the Emergency First
ESC Mobile Elevated Work Platform (Energy Safety Canada) 8:30 am
ESC Mobile Elevated Work Platform (Energy Safety Canada)
Jun 3 @ 8:30 am – 4:30 pm
Upon completion of this classroom based and simulated learning experience, the participant should be able to identify hazards, inspect the elevated work platform and safely and effectively operate the equipment. To visit the ESC Elevated
Standard First Aid / CPR / AED Level C (2 Day) 8:30 am
Standard First Aid / CPR / AED Level C (2 Day)
Jun 3 @ 8:30 am – 4:30 pm
Upon completion of this classroom based and practical learning experience, as delivered in conjunction with St. John Ambulance, the participant should be able to implement first aid and life-saving measures. To visit the Standard First
4
Boom Lift (am) 8:30 am
Boom Lift (am)
Jun 4 @ 8:30 am – 12:00 pm
Boom Lift Training will prepare you to safely operate boom lifts in compliance with provincial and federal regulations. Our training gives you the most up to date industry standards for safe work procedures for boom
ESC Confined Space Entry & Monitoring (Energy Safety Canada) 8:30 am
ESC Confined Space Entry & Monitoring (Energy Safety Canada)
Jun 4 @ 8:30 am – 4:30 pm
Upon completion of this classroom based and simulated learning experience, the participant should be able to demonstrate ESC standards in identifying and controlling hazards in a confined space, monitoring workers in the confined space. To visit the ESC Confined Space
Respiratory Protective Equipment RPE/APR/SCBA/Bottle Watch 8:30 am
Respiratory Protective Equipment RPE/APR/SCBA/Bottle Watch
Jun 4 @ 8:30 am – 4:30 pm
Upon completion of this classroom based and practical learning experience, the participant should be able to effectively don and use Air Purifying Respirators, Self-Contained Breathing Apparatus, and Supplied Air Breathing Apparatus and to perform duties
Standard First Aid / CPR / AED Level C (2 Day) 8:30 am
Standard First Aid / CPR / AED Level C (2 Day)
Jun 4 @ 8:30 am – 4:30 pm
Upon completion of this classroom based and practical learning experience, as delivered in conjunction with St. John Ambulance, the participant should be able to implement first aid and life-saving measures. To visit the Standard First
Scissor Lift (pm) 12:00 pm
Scissor Lift (pm)
Jun 4 @ 12:00 pm – 4:30 pm
Scissor Lift Operator Safety Training will prepare you to safely operate boom lifts in compliance with provincial and federal regulations. Train to safely operate Power Operated Mobile Work Platforms while identifying specific health and safety hazards associated
5
Young Drivers (Learn to Drive) 9:00 am
Young Drivers (Learn to Drive)
Jun 5 @ 9:00 am – 4:00 pm
For ANY new driver, ANY age. Learn how to drive with training from the best and most patient instructors, providing you with clear & articulate instruction. 25 hours of theory in a classroom setting and
6
Young Drivers (Learn to Drive) 9:00 am
Young Drivers (Learn to Drive)
Jun 6 @ 9:00 am – 4:00 pm
For ANY new driver, ANY age. Learn how to drive with training from the best and most patient instructors, providing you with clear & articulate instruction. 25 hours of theory in a classroom setting and
7
Class 3 Driver 8:30 am
Class 3 Driver
Jun 7 @ 8:30 am – 4:00 pm
The Class 3 Driver Certificate Program certifies the graduate to operate specialized trucks at home in Nova Scotia, across Canada and in Western Canada’s Oil and Gas industry. To visit the Construction & Oilfield Driver
Fall Protection 8:30 am
Fall Protection
Jun 7 @ 8:30 am – 4:30 pm
Upon completion of this classroom based and simulated learning experience, the participant should be able to identify and eliminate fall hazards by employing fall protection measures, including fall arrest and fall restraint. To visit the
H2S Alive (Energy Safety Canada) 8:30 am
H2S Alive (Energy Safety Canada)
Jun 7 @ 8:30 am – 4:00 pm
This course, as delivered in conjunction with Enform, will enable the learner to work safely in and around hydrogen sulfide (H2S) environments by identifying the presence of the hazard, using the appropriate respiratory protective equipment.
8
Trenching & Excavating Awareness (AM) 8:30 am
Trenching & Excavating Awareness (AM)
Jun 8 @ 8:30 am – 12:00 pm
If you are working on a work site that has either trenches or excavations, you need METI’s Trenching & Excavating Awareness. To visit the Trenching & Excavating Awareness Training page click here      
Power Line Hazard (PLH)pm 12:00 pm
Power Line Hazard (PLH)pm
Jun 8 @ 12:00 pm – 4:30 pm
Power Line Hazard PLH Training will prepare you to work safely near power lines by recognizing hazards and putting controls in place to prevent injury to people and property damage. Power Line Hazards Certification is
Wildlife Awareness 12:30 pm
Wildlife Awareness
Jun 8 @ 12:30 pm – 4:30 pm
This course will enable the learner to respect wildlife, reduce encounters, and deal with an encounter to protect themselves or those around them should the need arise. To visit the Wildlife Awareness Training page click
9
Ground Disturbance Level 201 8:30 am
Ground Disturbance Level 201
Jun 9 @ 8:30 am – 4:30 pm
METI’s Ground Disturbance Training prepares you to safely and effectively perform work that disturbs the ground if you are a planner, project manager, a supervisor or a worker. This course is a requirement for many work
10
ESC Fall Protection (Energy Safety Canada) 8:30 am
ESC Fall Protection (Energy Safety Canada)
Jun 10 @ 8:30 am – 4:30 pm
Upon completion of this classroom based and simulated learning experience, the participant should be able to demonstrate Energy Safety Canada standards in identifying and eliminating fall hazards by employing fall protection measures, including fall arrest
11
Confined Space (NS) 8:30 am
Confined Space (NS)
Jun 11 @ 8:30 am – 4:00 pm
METI’s Confined Space Training provides you with our in-house confined space simulator, training you to safely enter and monitor work in a confined space. Confined Space Training trains you to effectively serve as a confined
ESC Confined Space Entry & Monitoring (Energy Safety Canada) 8:30 am
ESC Confined Space Entry & Monitoring (Energy Safety Canada)
Jun 11 @ 8:30 am – 4:30 pm
Upon completion of this classroom based and simulated learning experience, the participant should be able to demonstrate ESC standards in identifying and controlling hazards in a confined space, monitoring workers in the confined space. To visit the ESC Confined Space
12
Young Drivers (Learn to Drive) 9:00 am
Young Drivers (Learn to Drive)
Jun 12 @ 9:00 am – 4:00 pm
For ANY new driver, ANY age. Learn how to drive with training from the best and most patient instructors, providing you with clear & articulate instruction. 25 hours of theory in a classroom setting and
13
Young Drivers (Learn to Drive) 9:00 am
Young Drivers (Learn to Drive)
Jun 13 @ 9:00 am – 4:00 pm
For ANY new driver, ANY age. Learn how to drive with training from the best and most patient instructors, providing you with clear & articulate instruction. 25 hours of theory in a classroom setting and
14
Emergency First Aid, CPR & AED Level A 8:30 am
Emergency First Aid, CPR & AED Level A
Jun 14 @ 8:30 am – 4:00 pm
Upon completion of this classroom based and simulated learning experience, as delivered in conjunction with St. John Ambulance, the participant should be able to implement first aid and life-saving measures. To visit the Emergency First
Fall Protection 8:30 am
Fall Protection
Jun 14 @ 8:30 am – 4:30 pm
Upon completion of this classroom based and simulated learning experience, the participant should be able to identify and eliminate fall hazards by employing fall protection measures, including fall arrest and fall restraint. To visit the
Respiratory Protective Equipment RPE/APR/SCBA/Bottle Watch 8:30 am
Respiratory Protective Equipment RPE/APR/SCBA/Bottle Watch
Jun 14 @ 8:30 am – 4:30 pm
Upon completion of this classroom based and practical learning experience, the participant should be able to effectively don and use Air Purifying Respirators, Self-Contained Breathing Apparatus, and Supplied Air Breathing Apparatus and to perform duties
Standard First Aid / CPR / AED Level C (2 Day) 8:30 am
Standard First Aid / CPR / AED Level C (2 Day)
Jun 14 @ 8:30 am – 4:30 pm
Upon completion of this classroom based and practical learning experience, as delivered in conjunction with St. John Ambulance, the participant should be able to implement first aid and life-saving measures. To visit the Standard First
15
ESC Confined Space Entry & Monitoring (Energy Safety Canada) 8:30 am
ESC Confined Space Entry & Monitoring (Energy Safety Canada)
Jun 15 @ 8:30 am – 4:30 pm
Upon completion of this classroom based and simulated learning experience, the participant should be able to demonstrate ESC standards in identifying and controlling hazards in a confined space, monitoring workers in the confined space. To visit the ESC Confined Space
ESC Fall Protection (Energy Safety Canada) 8:30 am
ESC Fall Protection (Energy Safety Canada)
Jun 15 @ 8:30 am – 4:30 pm
Upon completion of this classroom based and simulated learning experience, the participant should be able to demonstrate Energy Safety Canada standards in identifying and eliminating fall hazards by employing fall protection measures, including fall arrest
Forklift Operator Safety Training 8:30 am
Forklift Operator Safety Training
Jun 15 @ 8:30 am – 4:00 pm
Upon completion of this classroom based and simulated learning experience, the participant should be able to identify and control hazards, while demonstrating safe operation of “lift trucks” in compliance with provincial and federal regulations. To
Standard First Aid / CPR / AED Level C (2 Day) 8:30 am
Standard First Aid / CPR / AED Level C (2 Day)
Jun 15 @ 8:30 am – 4:30 pm
Upon completion of this classroom based and practical learning experience, as delivered in conjunction with St. John Ambulance, the participant should be able to implement first aid and life-saving measures. To visit the Standard First
16
Fall Protection 8:30 am
Fall Protection
Jun 16 @ 8:30 am – 4:30 pm
Upon completion of this classroom based and simulated learning experience, the participant should be able to identify and eliminate fall hazards by employing fall protection measures, including fall arrest and fall restraint. To visit the
Traffic Control Person(TCP) 8:30 am
Traffic Control Person(TCP)
Jun 16 @ 8:30 am – 4:30 pm
Upon completion of this classroom based and practical learning experience, the participant should be able to demonstrate safe work practices associated with traffic control, and will be given an accreditation card from the Nova Scotia
17
Basic Frame Scaffolding (Staging) User & Erector 8:30 am
Basic Frame Scaffolding (Staging) User & Erector
Jun 17 @ 8:30 am – 4:00 pm
Upon completion, the participant should be able to identify and control work site hazards, while safely and effectively erecting and using Tube and Coupler Scaffolding. To visit the Basic Frame Scaffolding (Staging) User & Erector
Boom Lift (am) 8:30 am
Boom Lift (am)
Jun 17 @ 8:30 am – 12:00 pm
Boom Lift Training will prepare you to safely operate boom lifts in compliance with provincial and federal regulations. Our training gives you the most up to date industry standards for safe work procedures for boom
Scissor Lift (pm) 12:00 pm
Scissor Lift (pm)
Jun 17 @ 12:00 pm – 4:30 pm
Scissor Lift Operator Safety Training will prepare you to safely operate boom lifts in compliance with provincial and federal regulations. Train to safely operate Power Operated Mobile Work Platforms while identifying specific health and safety hazards associated
18
BASICS.Fst (Food Safety) 8:30 am
BASICS.Fst (Food Safety)
Jun 18 @ 8:30 am – 4:30 pm
This course, as based on the Canadian Food Retail and Food Services Regulations and Code, Health Canada and CFIA, enables the student to prevent hazards in the Food service & Hospitality or Retail & Grocery.
H2S Alive (Energy Safety Canada) 8:30 am
H2S Alive (Energy Safety Canada)
Jun 18 @ 8:30 am – 4:00 pm
This course, as delivered in conjunction with Enform, will enable the learner to work safely in and around hydrogen sulfide (H2S) environments by identifying the presence of the hazard, using the appropriate respiratory protective equipment.
19
Young Drivers (Learn to Drive) 9:00 am
Young Drivers (Learn to Drive)
Jun 19 @ 9:00 am – 4:00 pm
For ANY new driver, ANY age. Learn how to drive with training from the best and most patient instructors, providing you with clear & articulate instruction. 25 hours of theory in a classroom setting and
20
Young Drivers (Learn to Drive) 9:00 am
Young Drivers (Learn to Drive)
Jun 20 @ 9:00 am – 4:00 pm
For ANY new driver, ANY age. Learn how to drive with training from the best and most patient instructors, providing you with clear & articulate instruction. 25 hours of theory in a classroom setting and
21
Fall Protection 8:30 am
Fall Protection
Jun 21 @ 8:30 am – 4:30 pm
Upon completion of this classroom based and simulated learning experience, the participant should be able to identify and eliminate fall hazards by employing fall protection measures, including fall arrest and fall restraint. To visit the
H2S Alive (Energy Safety Canada) 8:30 am
H2S Alive (Energy Safety Canada)
Jun 21 @ 8:30 am – 4:00 pm
This course, as delivered in conjunction with Enform, will enable the learner to work safely in and around hydrogen sulfide (H2S) environments by identifying the presence of the hazard, using the appropriate respiratory protective equipment.
Skid Steer Operator Safety Training 8:30 am
Skid Steer Operator Safety Training
Jun 21 @ 8:30 am – 4:30 pm
Upon completion of this classroom based and practical learning experience, the participant should be able to demonstrate safe operation of a Skid Steer, while identifying and controlling specific health and safety hazards associated with operating.
Traffic Control Person(TCP) 8:30 am
Traffic Control Person(TCP)
Jun 21 @ 8:30 am – 4:30 pm
Upon completion of this classroom based and practical learning experience, the participant should be able to demonstrate safe work practices associated with traffic control, and will be given an accreditation card from the Nova Scotia
22
ESC Confined Space Entry & Monitoring (Energy Safety Canada) 8:30 am
ESC Confined Space Entry & Monitoring (Energy Safety Canada)
Jun 22 @ 8:30 am – 4:30 pm
Upon completion of this classroom based and simulated learning experience, the participant should be able to demonstrate ESC standards in identifying and controlling hazards in a confined space, monitoring workers in the confined space. To visit the ESC Confined Space
Temporary Workplace Signage (TWS) (2 Day) 8:30 am
Temporary Workplace Signage (TWS) (2 Day)
Jun 22 @ 8:30 am – 4:00 pm
Upon successful completion of this course, participants will be given an accreditation card from the Nova Scotia Department of Transportation and Public works, while enabling them to demonstrate safe work practices associated with Temporary Workplace
23
ESC Fall Protection (Energy Safety Canada) 8:30 am
ESC Fall Protection (Energy Safety Canada)
Jun 23 @ 8:30 am – 4:30 pm
Upon completion of this classroom based and simulated learning experience, the participant should be able to demonstrate Energy Safety Canada standards in identifying and eliminating fall hazards by employing fall protection measures, including fall arrest
Temporary Workplace Signage (TWS) (2 Day) 8:30 am
Temporary Workplace Signage (TWS) (2 Day)
Jun 23 @ 8:30 am – 4:00 pm
Upon successful completion of this course, participants will be given an accreditation card from the Nova Scotia Department of Transportation and Public works, while enabling them to demonstrate safe work practices associated with Temporary Workplace
24
ESC Mobile Elevated Work Platform (Energy Safety Canada) 8:30 am
ESC Mobile Elevated Work Platform (Energy Safety Canada)
Jun 24 @ 8:30 am – 4:30 pm
Upon completion of this classroom based and simulated learning experience, the participant should be able to identify hazards, inspect the elevated work platform and safely and effectively operate the equipment. To visit the ESC Elevated
25
Forklift Operator Safety Training 8:30 am
Forklift Operator Safety Training
Jun 25 @ 8:30 am – 4:00 pm
Upon completion of this classroom based and simulated learning experience, the participant should be able to identify and control hazards, while demonstrating safe operation of “lift trucks” in compliance with provincial and federal regulations. To
Wildlife Awareness 12:30 pm
Wildlife Awareness
Jun 25 @ 12:30 pm – 4:30 pm
This course will enable the learner to respect wildlife, reduce encounters, and deal with an encounter to protect themselves or those around them should the need arise. To visit the Wildlife Awareness Training page click
26
Young Drivers (Learn to Drive) 9:00 am
Young Drivers (Learn to Drive)
Jun 26 @ 9:00 am – 4:00 pm
For ANY new driver, ANY age. Learn how to drive with training from the best and most patient instructors, providing you with clear & articulate instruction. 25 hours of theory in a classroom setting and
27
Young Drivers (Learn to Drive) 9:00 am
Young Drivers (Learn to Drive)
Jun 27 @ 9:00 am – 4:00 pm
For ANY new driver, ANY age. Learn how to drive with training from the best and most patient instructors, providing you with clear & articulate instruction. 25 hours of theory in a classroom setting and
28
Emergency First Aid, CPR & AED Level A 8:30 am
Emergency First Aid, CPR & AED Level A
Jun 28 @ 8:30 am – 4:00 pm
Upon completion of this classroom based and simulated learning experience, as delivered in conjunction with St. John Ambulance, the participant should be able to implement first aid and life-saving measures. To visit the Emergency First
Fall Protection 8:30 am
Fall Protection
Jun 28 @ 8:30 am – 4:30 pm
Upon completion of this classroom based and simulated learning experience, the participant should be able to identify and eliminate fall hazards by employing fall protection measures, including fall arrest and fall restraint. To visit the
Standard First Aid / CPR / AED Level C (2 Day) 8:30 am
Standard First Aid / CPR / AED Level C (2 Day)
Jun 28 @ 8:30 am – 4:30 pm
Upon completion of this classroom based and practical learning experience, as delivered in conjunction with St. John Ambulance, the participant should be able to implement first aid and life-saving measures. To visit the Standard First
29
Forklift Operator Safety Training 8:30 am
Forklift Operator Safety Training
Jun 29 @ 8:30 am – 4:00 pm
Upon completion of this classroom based and simulated learning experience, the participant should be able to identify and control hazards, while demonstrating safe operation of “lift trucks” in compliance with provincial and federal regulations. To
Respiratory Protective Equipment RPE/APR/SCBA/Bottle Watch 8:30 am
Respiratory Protective Equipment RPE/APR/SCBA/Bottle Watch
Jun 29 @ 8:30 am – 4:30 pm
Upon completion of this classroom based and practical learning experience, the participant should be able to effectively don and use Air Purifying Respirators, Self-Contained Breathing Apparatus, and Supplied Air Breathing Apparatus and to perform duties
Standard First Aid / CPR / AED Level C (2 Day) 8:30 am
Standard First Aid / CPR / AED Level C (2 Day)
Jun 29 @ 8:30 am – 4:30 pm
Upon completion of this classroom based and practical learning experience, as delivered in conjunction with St. John Ambulance, the participant should be able to implement first aid and life-saving measures. To visit the Standard First
30
Ground Disturbance Level 201 8:30 am
Ground Disturbance Level 201
Jun 30 @ 8:30 am – 4:30 pm
METI’s Ground Disturbance Training prepares you to safely and effectively perform work that disturbs the ground if you are a planner, project manager, a supervisor or a worker. This course is a requirement for many work

Take A Video Tour of METI.

Have a question?

Call us at (902) 539-9766, or send us an email: training@metiatlantic.com
Or Stop by our Sydney Campus at 301 Alexandra Street, Sydney.

Quick Contact

Testimonials

Jamie Buist

I would like to thank METI for the great SAIA scaffold course they put on.  I was able to find work right here in Sydney thanks, METI.
Derek Gouthro – I just received a call from Kiewit (scaffolding).  Thank you,
everyone at M.E.T.I.!

Jamie Buist

Pre-Employment Scaffold Program

Chad Johnston – Nov 2018:

Hey folks just finishing up my scaffolding course great course to take all the
instructors great people! Big shout out to Gerard, Chris, uncle Harold, Paul, and Brian for making this experience a good one, excellent course folks high
recommend it!

Chad Johnston

Pre-Employment Scaffold Program

Jolene MacNeil – June 2016: 

As a recent graduate of the SAIA (Scaffold and Access Industry Association) Program (June, 2016) as well as the Environmental Health and Safety Program (fall, 2015).

I just wanted to thank all the dedicated staff at METI, especially Gerard Jessome, for passing along their infinite knowledge, skills and contacts during my training. With Gerard’s assistance, I was offered a position with Brock Canada Field Services immediately following the
completion of my course. As a “mature” female student who has never worked in the oil and gas industry, I believe this opportunity presented itself on the basis of the excellent training provided by METI, and the respect they have earned for producing well qualified graduates. Keep up the great work!

Jolene MacNeil

Pre-Employment Scaffold Program

Liam MacNeil – July 2018:

I’d like to thank everyone at METI for the great SAIA Pre-Employment program. Got a job with Redi-Energy on Suncor’s Fort Hills site before the course was even over!

Awesome program, everything we learned in class is being applied daily. Special thanks to Gerard Jessome for being a great instructor and helping me get a job.

Liam MacNeil

Pre-Employment Scaffold Program

Elmer Haan  – Sept 2017: 

Program Manager

METI has been providing excellent service, and reliable training for CLAC for many years. Their diverse course offerings, from ESC certifications to SAIA Pre-Employment and journeyperson scaffold training has proven to be extremely valuable to us. Our continued strong relationship with METI allows CLAC members to access training in Eastern Canada. METI instructors are knowledgeable and have shown a real passion for ensuring our members are trained to the highest industry standards. Brian Carrier reviewed METI Maritime Environmental Training Institute — 5 star May 11, 2018. I attended METI's courses and I am very satisfied with the training they gave me. I would like to thank my instructor Gerard Jessome providing me with quality training. I am now a 3rd year scaffolder soon to be journeyman.

METI has been with me every step of the way and has been instrumental in my success. Within 2 months of completing the program, I had found employment. Since then, I have had the opportunity to work for Quinn Construction at 28$ per hour. Then I worked for PCL as a second year for 36$ per hour. Then I became third year with a salary of 38,75$ per hour. I am now working for AEcom with an hourly rate of 36$. The drop-in wage aside, with my overtime hours, my income has remained the same.

Thanks to METI, I went from having a job to having a career I am proud of.

Elmer Haan

Pre-Employment Scaffold Program

Mark Callaghan – Sept 2017: 

Project Coordinator
Panels and Pipes Mechanical Services

We have developed a great relationship with METI and their Pre-Employment Scaffolding Program over the past five years. Numerous graduates have been employed by Panels and Pipes and are always very well prepared to begin their careers as Scaffolders. They are well trained, knowing and understanding the basics of scaffolding and how to construct it safely. Along with their SAIA Scaffolding accreditation and added safety certifications METI graduates are always on the top of our list when hiring new Scaffolders.

Mark Callaghan

Pre-Employment Scaffold Program

Keith MacIntyre

This program is hands down the best in the industry. The
training I received prepared me for just about every situation I ran into when I began working in the oil and gas industry in Alberta. I could answer questions without hesitation, and put my words into action. I worked from an entry level safety watch position to a team lead position in my first year, by the end of my third year in the oil patch I was an HSEQ Manager overseeing several sites.

Keith MacIntyre

Environmental Health Safety Technician

Leigh Blinkhorn – June 2017:

When I graduated from the EHST program in 2011, I immediately started work as a Health and Safety Advisor with Commissioning Group. From there, I worked with Kentz, MMR, and KFFT.

My employers were so impressed with the caliber of my training and the working knowledge that I possessed, that they funded further training for me (Tap Root investigation, etc.). I couldn’t ask for a better group of people to teach this program. Their support continued long after I left METI.

Leigh Blinkhorn

Environmental Health Safety Technician

Donna Lea Kehoe – Jan 2018:

In 2015 I had no job, no prospects and not very much self confidence, when I was told about METIs environmental tech. course by Jean Chisholm of Nova Scotia Works. I graduated in July 2015 with alot of tickets but no real idea of what to do with what I had. After many closed doors METI invited me to a job fair for Sulzer Chemtech. After working for them for the last 2 years, I got married in April, I just bought my very first new car and I hope to be in my own home sometime in the not to distant future. I loved my experience at METI & I love my job with Sulzer.

Thanks for the opportunity!

Donna Lea Kehoe

Environmental Health Safety Technician

Jay Budd – July 2018:

After fulfilling my Environmental Health and Safety Technicians Diploma in
February, I was recently hired on in Saint John, NB with a contracted company, working at the Irving Oil Refinery as a Safety Coordinator! They were very impressed with the number of courses I graduated with. They give you the hands- on experience and plenty of courses you need to get to where ever it is you may want to be! So grateful to have taken this course and highly recommend it to anyone who would like to get into the Safety field!!

Thank you METI

Jay Budd

Environmental Health Safety Technician
Top